How to Remove a Tub Drain with Broken Crosshairs

Introduction

A tub drain is an essential part of any bathroom, but it can become a nuisance when the crosshairs are broken. Broken crosshairs can make it difficult to open and close the drain, and can even lead to leaks. Fortunately, removing a tub drain with broken crosshairs is a relatively simple task that can be completed in a few steps.

Safety Precautions

Turn off the water supply to the tub before starting any work.
Wear gloves and safety glasses to protect yourself from sharp edges.
Place a bucket or towel under the drain to catch any water that may leak out.

Materials You’ll Need

Adjustable wrench
Pliers
Screwdriver
Replacement drain stopper (optional)

Step-by-Step Instructions

Remove the stopper. If the stopper is still in place, use a screwdriver to remove the screw that holds it in place. Then, pull the stopper out of the drain.
Loosen the retaining nut. The retaining nut is located just below the stopper. Use an adjustable wrench to loosen the nut, but do not remove it completely.
Pull out the drain assembly. Once the retaining nut is loose, you should be able to pull the drain assembly out of the drain hole. If the assembly is stuck, use pliers to gently pull it out.
Remove the broken crosshairs. The broken crosshairs are usually attached to the drain assembly with screws. Use a screwdriver to remove the screws and detach the crosshairs.
Install the replacement crosshairs (optional). If you have a replacement drain stopper, it will come with new crosshairs. Insert the new crosshairs into the drain assembly and tighten the screws.
Reinstall the drain assembly. Insert the drain assembly back into the drain hole and tighten the retaining nut. Make sure the nut is tight enough to prevent leaks, but not so tight that you damage the assembly.
Install the stopper. Insert the stopper into the drain and tighten the screw that holds it in place.
Turn on the water supply. Turn on the water supply to the tub and check for any leaks. If there are no leaks, the drain is successfully removed.

Conclusion

Removing a tub drain with broken crosshairs is a simple task that can be completed in a few steps. By following the instructions in this article, you can easily remove the broken crosshairs and restore your drain to working order.

Also Read: What Is Darth Talon In

Recommend: What Is A Sign Marquee

Related Posts: What Is The Purpose Of Ladle

Also Read: Can You Get Tan From Welding

Recommend: How Much Should I Bench Press