How to Drain a Samsung Washer
Draining a Samsung washer is a simple process that can be completed in a few minutes. Here are the steps on how to do it:
Step 1: Unplug the Washer
Before you begin, unplug the washer from the power outlet. This will prevent any electrical shock hazards.
Step 2: Open the Drain Pump Filter
The drain pump filter is located at the bottom of the washer, behind a small access panel. Open the panel and remove the filter by turning it counterclockwise.
Step 3: Drain the Water
Once the filter is removed, water will start to drain out of the washer. Allow the water to drain completely into a bucket or sink.
Step 4: Clean the Filter
While the water is draining, take a moment to clean the drain pump filter. Use a brush or sponge to remove any hair, lint, or debris that may be clogging the filter.
Step 5: Reinsert the Filter
Once the filter is clean, reinsert it into the drain pump by turning it clockwise. Make sure the filter is tightened securely.
Step 6: Close the Access Panel
Close the access panel and plug the washer back into the power outlet.
Troubleshooting
If you encounter any problems while draining your Samsung washer, here are some troubleshooting tips:
- The water is not draining. Check to make sure that the drain pump filter is not clogged. Also, check the drain hose for kinks or blockages.
- The washer is making a loud noise. The drain pump may be faulty. Contact a qualified appliance repair technician to have the pump replaced.
- The washer is leaking water. Check the drain hose for leaks. Also, check the gasket around the door to make sure it is not torn or damaged.
Conclusion
Draining a Samsung washer is a simple process that can be completed in a few minutes. By following the steps outlined in this article, you can easily drain your washer and keep it running smoothly.
Also Read: How Much Of Your Salary Should You Save
Recommend: How To Draw A Minecraft Creeper
Related Posts: How To Clean Powerbeats Pro
Also Read: Can Giorno Beat Kars