How to Clean a Shark Rocket Vacuum

Shark Rocket vacuums are popular for their powerful suction and lightweight design. To keep your Shark Rocket vacuum performing at its best, it’s important to clean it regularly. Here’s a comprehensive guide on how to clean your Shark Rocket vacuum:

Empty the Dustbin

Press the dustbin release button and pull the dustbin straight up.
Empty the contents of the dustbin into a trash can.
Rinse the dustbin with water if it’s dirty.
Let the dustbin dry completely before reattaching it to the vacuum.

Clean the Filters

Shark Rocket vacuums have two types of filters: a pre-motor filter and a post-motor filter. Both filters should be cleaned regularly to maintain suction power and prevent allergies.

Pre-Motor Filter

Turn off the vacuum and unplug it.
Remove the dustbin.
Pull the pre-motor filter straight up out of the vacuum.
Rinse the pre-motor filter with water until the water runs clear.
Let the pre-motor filter dry completely before reattaching it to the vacuum.

Post-Motor Filter

Turn off the vacuum and unplug it.
Locate the post-motor filter on the back of the vacuum.
Twist the post-motor filter counterclockwise to remove it.
Rinse the post-motor filter with water until the water runs clear.
Let the post-motor filter dry completely before reattaching it to the vacuum.

Clean the Brushes

The brushes on your Shark Rocket vacuum can get clogged with hair, pet fur, and other debris. To maintain optimal cleaning performance, the brushes should be cleaned regularly.

Turn off the vacuum and unplug it.
Flip the vacuum over and locate the brushroll cover.
Remove the brushroll cover and pull the brushroll out of the vacuum.
Use a pair of scissors to cut away any hair or debris that is wrapped around the brushroll.
Wipe down the brushroll with a damp cloth to remove any remaining dirt or debris.
Reattach the brushroll to the vacuum and replace the brushroll cover.

Troubleshooting

If you’re having trouble cleaning your Shark Rocket vacuum, here are some troubleshooting tips:

The vacuum won’t turn on: Check that the vacuum is plugged in and that the power switch is turned on. Also, check for any blockages in the hose or brushroll.
The vacuum is losing suction: Check the dustbin and filters to see if they are full or dirty. Clean or replace them as needed.
The vacuum is making a strange noise: Turn off the vacuum and unplug it. Check for any debris that may be stuck in the hose or brushroll. Also, check the belts to see if they are worn or damaged.

Conclusion

By following these steps, you can keep your Shark Rocket vacuum clean and performing at its best. Regular cleaning will help to extend the life of your vacuum and ensure that it’s always ready to tackle any cleaning task.

Also Read: What Temperature Is It Going To Be Tomorrow

Recommend: What Was Kim Wilde Famous For

Related Posts: How To Pronounce Cholecystitis

Also Read: Where Is Polynesia

Recommend: Where Can I Buy Ruffed Grouse