How Do You Fix A Stripped Shower Faucet

by

How to Fix a Stripped Shower Faucet

A stripped shower faucet can be a frustrating problem, especially when you’re in a hurry. But don’t worry, it’s a relatively easy fix that you can do yourself with a few basic tools and materials.

Tools and Materials You’ll Need

  • Adjustable wrench
  • Faucet seat wrench or large flathead screwdriver
  • Plumber’s putty
  • New faucet stem
  • New faucet seat washer
  • Vaseline or silicone grease

Step-by-Step Instructions

1. Turn Off the Water Supply

The first step is to turn off the water supply to the shower. This is usually done by turning off the valves under the sink or behind the shower wall.

2. Remove the Faucet Handle

Once the water is turned off, remove the faucet handle. This is usually done by unscrewing the screw that holds the handle in place.

3. Remove the Faucet Stem

Once the handle is removed, you can remove the faucet stem. This is done by using an adjustable wrench or a faucet seat wrench to unscrew the stem counterclockwise.

4. Inspect the Faucet Stem and Seat

Once the stem is removed, inspect it and the seat for any damage. If the stem or seat is damaged, it will need to be replaced.

5. Apply Plumber’s Putty to the New Seat

If the seat is not damaged, apply a small amount of plumber’s putty to the threads of the new seat washer. This will help to create a watertight seal.

6. Install the New Seat Washer

Install the new seat washer onto the seat. Make sure that the washer is properly seated and that there are no gaps.

7. Apply Vaseline to the New Stem

Apply a small amount of Vaseline or silicone grease to the threads of the new stem. This will help to create a watertight seal and prevent the stem from seizing up.

8. Install the New Stem

Install the new stem into the faucet body. Tighten the stem clockwise until it is snug. Do not overtighten the stem, as this can damage the faucet body.

9. Reinstall the Faucet Handle

Reinstall the faucet handle by screwing it onto the stem. Tighten the screw until the handle is secure.

10. Turn On the Water Supply

Turn on the water supply to the shower and check for leaks. If there are any leaks, tighten the packing nut on the stem until the leak stops.

Conclusion

Fixing a stripped shower faucet is a relatively easy task that can be done in a few minutes with a few basic tools and materials. By following these step-by-step instructions, you can get your shower faucet up and running again in no time.

Also Read: Where Can I Get Ice

Recommend: Is Incense Bad For Lungs

Related Posts: Does Chrysanthemum Need Full Sun

Also Read: What Is Moos Project Viewer

Recommend: What Commercial Address Means

Leave a comment