How to Shim a Door Hinge

Shimming a door hinge is a simple and effective way to fix a door that is not closing properly. When a door is not closing properly, it can allow drafts to come in, making your home less energy-efficient. It can also make it difficult to lock the door, which can be a security risk.

Materials you will need

Shims
Hammer
Nail set
Screwdriver
Safety glasses

Safety first

Before you begin, it is important to put on safety glasses. This will protect your eyes from flying debris.

Step-by-step instructions

Remove the door from the hinges. To do this, simply lift the door up and off of the hinges.
Place a shim on the bottom of the hinge. The shim should be about 1/16 of an inch thick.
Tap the shim into place with a hammer. Use a nail set to help you drive the shim into place.
Reattach the door to the hinges.
Test the door to make sure it is closing properly. If the door is still not closing properly, you may need to add another shim.

Tips and tricks

If you are having trouble driving the shim into place, you can try using a nail set.
If the shim is too thick, you can cut it down to size with a utility knife.
If you are shimming a door that is in a high-traffic area, you may want to use a stronger adhesive to keep the shim in place.

Conclusion

Shimming a door hinge is a simple and effective way to fix a door that is not closing properly. By following the steps in this article, you can easily complete this task yourself.

Also Read: How To Stop Oily Face During The Day

Recommend: How Much Horsepower Does A 2004 V8 Mustang Have

Related Posts: How Do I Calculate Cfm Of A Room

Also Read: What Is The Mass Of A Grain Of Sand

Recommend: How Many Times A Curve Can Be Modified In Ms Paint